BASE 4 H30 SC: open cell ceiling delta section, ideal for plenum inspection and plant maintenance
BASE 4 H30 SC spring open cell metal ceiling system is made up of closed blades with distinctive delta section. Blades are equipped with special slots properly shaped to allow a easy insertion of the coupling springs.
TYPE: 600×600 | 600×1200 mm open cell panels
ELEMENTS: TM and TF interlocking profiles base 4 H30
BLADES: closed delta-shape
TSC carriers with pitched cuts for blades centering
HANGERS: with threaded bar
COLOURS/FINISHING: Atena standard white and silver pre-painted aluminium | RAL/NCS | wood-effect finishing
BASE 4 H30 SC: spring open cell metal ceiling system
Base 4 H30 SC is an aluminium open cell ceiling made up of special closed blades with a distinctive delta section, at the ends of which there are special slots for the easy insertion of the suspension springs. Modules can therefore be removed or left open for plenum inspection or plant maintenance. The panels of this open cell ceiling are available in two sizes, 600×600 mm and 600×1200 mm, and are installed by simply hooking them into the special TSC carriers, which have grooves for centring the panels. To ensure the correct alignment of the 27x33x27 carriers, which are 2400 mm long, they are used as spacers and installed orthogonally at a distance of 2400 mm.
BASE 4 H30 SC: the swinging aluminium open cell ceiling ideal for any project
The BASE 4 open cell ceiling delta section has a continuous effect that creates a visually pleasing pattern and gives the ceiling a linear appearance. The special feature of the BASE 4 H30 spring open cell metal ceiling system is that it can be supplied with standard grids or, on request, with customised cells. In fact, it is the metal cell with the widest range of grid sizes in the catalogue. The choice of size depends on the architectural design and on the need to leave more or less open space above the plenum. In addition, the BASE 4 H30 shelter is available in different finishes and colours, allowing to further customise the aesthetic appearance of the room. The versatility of this open cell ceiling delta section makes it easy to adapt to different architectural styles and designs.
PRODUCT TYPE:
600×600 | 600×1200 mm
open cell panels
MESHES:
standard
special sizes on request
MATERIALS:
4/10 aluminium
MODULES | STRUCTURES:
Panels: 600×1200 mm | 600×1200 mm
Carriers/spacers 27x33x27 L 2400 mm
COLORS | FINISHING:
Atena standard white and silver pre-painted aluminum
RAL/NCS post-painting
Wood finishing

